Correspondingly, Can you cut fiberglass columns? Columns can be field trimmed to a specified length. When trimming a round fiberglass column Shaft to length, make sure to always trim from the bottom end only. A circular saw with an abrasive Blade can be used to make this cut.
What kind of paint do you use on fiberglass columns? A high quality acrylic exterior paint should be used to finish your PermaCast® columns. At least one coat of primer and two coats of the final paint should be used.
Furthermore, How do you install a fiberglass post?
Are PermaCast columns load bearing?
PermaLite® columns are a cost-effective, load bearing, and versatile option to use. PermaLite® is available in plain square and recessed panel square options with several different cap and base styles.
What do you cut fiberglass columns with? Fire up your circular saw with an abrasive and fine-toothed blade and make the cut through the masking tape, rotating the column as needed too complete the cut. If the column is tapered, make sure to cut only from the bottom in order to keep the aesthetic and proportion of the column.
How do you cut fiberglass pole? Align the back edge of the fine-toothed hacksaw blade with the pencil mark. Slowly pull the hacksaw toward you and then away from you to cut into the fiberglass stick. Continuing cutting until you cut the fiberglass stick into two pieces. Pull the masking tape from the fiberglass stick to complete the cutting process.
What kind of blade do you use to cut fiberglass? When choosing the right sawzall blade for fiberglass, the abrasive characteristics of fiberglass should be considered. Because of the abrasive quality of fiberglass, a carbide grit or a carbide tipped blade performs well. We also have customers that do well using our standard MK Morse 14 TPI metal cutting blade.
Are fiberglass columns paintable?
Fiberglass columns offer an affordable alternative to structural or decorative stone or masonry columns. They hold paint well, are easy to paint and stand up to a variety of conditions and abuse. Available in a variety of designs and finishes, they can be coordinated to match any decor, interior or exterior.
How do you prepare fiberglass columns for painting? Instructions
- Use a damp cloth to thoroughly clean the column of any dirt or dust particles. …
- The caps and bases will have small gaps between them and the column; make sure to caulk these areas. …
- Use a 2″ or 3″ paintbrush to apply your primer. …
- Lightly sand the entire column with 120-grit sand paper.
Can you paint a fiberglass pole?
For best results, paint exterior fiberglass fixtures when the temperature is between 50 and 90 degrees Fahrenheit. As with most painting jobs, painting the light pole is easier when you protect the areas you don’t want to accidentally paint.
How do you install outdoor columns? 
What is a PermaCast column?
Made from a proprietary blend of fiber-reinforced polymers, PermaCast® columns provide an aesthetically pleasing column with exceptional structural capabilities. This durable and low maintenance column provides a seamless look to your front porch that stands up to the elements like no other product on the market.
How much does it cost to replace porch columns?
Cost of related materials and supplies typically required to install ornamental columns including: fasteners, connectors, surface preparation and finishing materials. For a basic project in zip code 47474 with 1 column, the cost to Install Ornamental Columns starts at $473 – $660 per column.
How much weight can fiberglass columns hold? Fiberglass: A 12″x8′ fiberglass column holds 18,000 pounds and weights 114 pounds. Wood: A 12″8′ wood column holds 10,000 pounds and weighs 55 pounds.
Is PermaCast the same as fiberglass? PermaLite® columns are pultruded from fiberglass strands with the same durability as a PermaCast® column with a thinner wall and lighter weight. The caps and bases for fiberglass columns are made from durable, low-maintenance materials with both architectural and historical authenticity or a modern, contemporary look.
Are fiberglass columns hollow?
Fiberglass polymer composite columns are hollow throughout which allows the columns to be factory or field split in halves to wrap structural posts. These columns are the most dense and heaviest of all the fiberglass column materials available.
How do you cut structural fiberglass? 
How do you cut fiberglass composite?
Jigsaw blades are perfect for making large cuts or for cutting along flat sheets of laminate composites, such as fiberglass and carbon fiber. They are designed to cut in both directions and file the edges of your laminate as you cut, reducing chances of chipping to the surface.
How do you cut a PVC column? 