One method for attaching a fiberglass column to a floor or substrate and soffit or ceiling is to use L-brackets. The brackets get secured into the floor or ceiling using the appropriate screws and then attached into the side of the column shaft using masonry screws. Don’t forget to pre-drill into the fiberglass.
Correspondingly, How do you anchor fiberglass columns? 
Will screws hold in fiberglass? Threads cut by wood screws into wood, or by sheet-metal screws into fiberglass, lack the strength, consistency, and durability that machined threads inside a metal nut or other thick metal component can provide.
Furthermore, How strong are fiberglass columns?
Fiberglass: A 12″x8′ fiberglass column holds 18,000 pounds and weights 114 pounds. Wood: A 12″8′ wood column holds 10,000 pounds and weighs 55 pounds.
What type of screws are best for fiberglass?
Best Screws for Fiberglass
- Snug Fastener SNG221 Screws for Fiberglass.
- Tight-Point FLAT-ZIN875-100 Screws for Fiberglass.
- Tight-Point FLAT-ZIN6100-100 Screws for Fiberglass.
- Chenango Supply 5 LB 305 Stainless TORX Deck Screw.
- Grip Rite Prime Guard MAXS62704 Type 17 Point Deck Screw.
What kind of paint do you use on fiberglass columns? A high quality acrylic exterior paint should be used to finish your PermaCast® columns. At least one coat of primer and two coats of the final paint should be used.
How do you install a fiberglass post? 
What is PermaCast? Made from a proprietary blend of fiber-reinforced polymers, PermaCast® columns provide an aesthetically pleasing column with exceptional structural capabilities. This durable and low maintenance column provides a seamless look to your front porch that stands up to the elements like no other product on the market.
Can you use self tapping screws on fiberglass?
When using self-tapping screws in fiberglass you will find that the drilling tip of the screw becomes dull quickly as it comes into contact with the glass fibres, which leads to cracking in the glass fibres and the gel coat. To avoid cracking proper installation techniques must be used.
Can you drill Fibreglass? Drill a small pilot hole in your fiberglass. Make it smaller than the finished hole you are planning to drill. Use a slow speed when drilling to reduce chipping, and do not put any pressure on the drill bit—allow the bit itself to do the work.
How do you fix a crack in a fiberglass column?
Can you cut fiberglass columns? Columns can be field trimmed to a specified length. When trimming a round fiberglass column Shaft to length, make sure to always trim from the bottom end only. A circular saw with an abrasive Blade can be used to make this cut.
What do fiberglass columns look like?
Can you use self tapping screws in Fibreglass?
You shouldn’t have any trouble drilling carefully with a hand drill through the gelcoat with the right bit for the screw and enlarging the hole in the gelcoat with a slightly larger bit. This will take a tiny section of glass with it but there’ll be plenty left to hold the screw which should be tightened just so.
How do you fasten wood to fiberglass? You can glue fiberglass to wood with an epoxy resin. Epoxy will glue almost any materials together and is the adhesive of choice when gluing fiberglass to wood. Epoxy has the advantage of spreading across the two surfaces and filling in gaps that are visible between the fiberglass and wood.
How do you attach fiberglass to wood? 
Are fiberglass columns paintable?
Fiberglass columns offer an affordable alternative to structural or decorative stone or masonry columns. They hold paint well, are easy to paint and stand up to a variety of conditions and abuse. Available in a variety of designs and finishes, they can be coordinated to match any decor, interior or exterior.
Do you need special paint for fiberglass? The Sunrise Window company recommends an acrylic latex paint for fiberglass. Acrylic paint adheres well to fiberglass, overcoming one of the main challenges to painting this material. Acrylic paint is less likely to crack and blister, and will hold up well to cleaning.
Can you paint a fiberglass pole?
For best results, paint exterior fiberglass fixtures when the temperature is between 50 and 90 degrees Fahrenheit. As with most painting jobs, painting the light pole is easier when you protect the areas you don’t want to accidentally paint.
How do you install outdoor columns? 
How much does it cost to replace porch columns?
Cost of related materials and supplies typically required to install ornamental columns including: fasteners, connectors, surface preparation and finishing materials. For a basic project in zip code 47474 with 1 column, the cost to Install Ornamental Columns starts at $473 – $660 per column.
How do I install a split column? 