Recessed Lighting Alternatives
- Disc Lights.
- Pendant Lights.
- Spotlights And Downlights.
- Tube Lights.
- Track Lighting.
- Flush Mount Lights.
- Cheaper Alternative To Recessed Lighting.
- Alternative To Recessed Lighting In Kitchen.
Correspondingly, Are LED recessed lights worth it? LED can lights are designed to last about 50 times longer, which means less maintenance and less time spent on replacing burned-out bulbs that are often very hard to get at. The lifespan of an LED is simply unmatched by other types of lighting.
What is the difference between can lights and recessed lights? Recessed lights, also known as can lights, are described as metal light housings installed in the ceiling for a sleek look that gives you back your ceiling.
Furthermore, How many recessed lights do I need?
A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. This is an important rule to keep in mind when you are going to rely exclusively on recessed ceiling lights to illuminate your kitchen.
What are wafer lights?
Wafer Lights are thin, low profile fixtures that come in a number of shapes and sizes. Their narrow profile allows them to be used in for new or retrofit applications.
What size recessed light for 8ft ceiling? When spacing recessed lights, use this general rule of thumb: divide the height of the ceiling by two to get the distance the lights should be from one another. For example, an 8-foot tall ceiling should have recessed lights spaced 4-feet apart.
What size bulb fits in a 4 inch recessed light? When choosing a bulb, you must find out the sizing of your recessed fixture can. For general household lighting, most recessed lighting cans are 4″, 5″, or 6″. If your household has 4” cans, only BR30 bulbs will fit. For 5″ cans, BR30 bulbs will fit with a little space, while a BR40 will fit with no space on the sides.
Do Canless LED lights get hot? Answer: While LEDs run much cooler than incandescents, their electronic components and external heat sinks do get quite hot; you would still need to keep the insulation away from your fixtures.
How many can lights in a 20×20 room?
If you have a center light fixture, you should be able to use 4 inch line voltage cans or low voltage for supplemental lighting. I would go with at least 8 three inch cans for a 20 foot room.
How many recessed lights can I put on one switch? The main limitation on the number of recessed lights that a single switch can control is the rating of the circuit breaker controlling the circuit. Each incandescent or halogen 60-watt bulb draws around 1/2 amp, and therefore, standard lighting with a 15amp breaker can manage 30 lights.
Can I daisy chain wafer lights?
Remember that you must run one ultra-thin extension cable (or run of low voltage wire) for each light. You can not daisy chain multiple lights together.
What is a Canless light? Canless recessed lighting does not come with canisters or housings to hold the bulb. They are thin—or ultra-thin—and use LED light integrated into the system. They are compact and can fit into tight spaces.
How do you determine recessed lighting placement?
A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.
Can you have too many recessed lights?
It often seems that installing recessed lights is a cure all, but they cannot properly wash light upon walls and all dark corners, which would bounce reflective light into the room. In fact, using too many recessed light may leave areas of your room dark and may even cost you more on your electric bill.
Do you put LED lights on the ceiling or wall? We recommend having the lights go up your wall, but if you prefer to start the line of lights from the top of your wall, you will need LED strip clips to help hold up the power supply against the wall.
Can you mix recessed lighting sizes? There’s very little difference (if any) between the two sizes. Myth #3: You should always use the same size throughout your home. Fact: Style should be consistent, but consider size and type on a functional basis. It is perfectly acceptable to mix 4-inch and 6-inch recessed lights in the same room.
What’s the difference between R40 and BR40?
The difference between R40 and BR40 bulbs isn’t size (they’re the exact same in that department) but beam spread. Both feature a built-in reflector, but with BR40 CFL bulbs, you can see a more bulged beam shape versus the more traditional shape of R40 CFL bulbs.
What is the difference between PAR 30 and PAR 38? PAR30 bulbs are great for larger rooms where multiple light fixtures are being used. Short neck PAR30 bulbs are more common for tracking lighting while long neck PAR30 bulbs are useful for recessed cans. PAR38 BULBS are primarily used for outdoor lighting. PAR38 bulbs can be used as general flood and safety lights.
Can I use A19 bulb in recessed?
The A19 bulbs are not recommended for use in a recessed or fully enclosed fixture.
What size can light for kitchen? The common sizes for residential recessed light fixtures are 4″ through 7″ in diameter. One way to answer this question is by considering how far the ceiling is from where you want the light, and how big an area you want to light. In an 8′ ceiling, a 4″ fixture can work well to provide kitchen countertop lighting.
Can I use new construction recessed lighting?
New construction fixtures can be used in retrofit applications when the electrician has access to the area above where the fixture will be installed. For example, if there is attic access, new construction housings can be fitted.