Overview. The mobile-friendly Centralus irrigation management platform provides highly secure, comprehensive cloud-based control and monitoring features to new or existing ICC2 dial-based controllers and ACC2 controllers.
Correspondingly, Is Hunter a good irrigation controller? Hunter valves are built with the highest quality to last through the wear and tear of any irrigation system design in any region. They are also easy to install and service, which requires less maintenance to your irrigation system.
What is Hunter controller? Hunter controllers allow you to setup multiple Start Times to run programs more than once a day. At each Start Time the controller will cycle through all the Station Run Times on that given program.
Furthermore, What is Hunter system?
The Hunter system offers a unique advantage, thanks to its innovative Smart Irrigation controller features. You can easily control and automate your sprinklers through the control system for automatic turn-on and shut-off, as well as scheduled watering times. This is based on the Hunter Run Time Calculator.
What is Hunter Solar Sync?
The Solar Sync ET sensor is an advanced weather sensor that calculates evapotranspiration (ET) and adjusts Hunter controllers daily based on local weather conditions. Solar Sync measures sunlight and temperature, and uses ET to determine the correct seasonal adjustment percentage value to send to the controller.
How do I use hunters Solar Sync?
How do you test solar sync?
How does a Hunter rain sensor work? The two leading manufacturers of irrigation products, Rain Bird and Hunter, both make rain sensors and both detect rain using the same method. They have a series of porous cork discs that when they get wet from rain, they expand and force the sensor to prevent the controller from watering.
How do I turn off Hunter Solar Sync?
If the Rain Sensor or Freeze Sensor is preventing system operation, SENSOR OFF will be displayed on the controller’s display. Simply move the Bypass switch on the controller to BYPASS and the Solar Sync’s Rain and Freeze Sensor will be bypassed.
How do you sync a Hunter Wireless Rain Sensor?
- Connect the blue and white wire to any of the four Sensor Terminal pairs (SEN1 shown).
- Attach yellow wires to 24 VAC and COM terminals.
- Use features at the “Set Sensor Operation” dial position on ACC to complete the setup.
- Use Devices and Sensor Response options on ACC2 to complete the setup.
How do I program my Hunter Pro C sprinkler?
Are rain sensors worth it? While rain sensors are generally a good idea, they’re not usually necessary in extremely arid environments that receive relatively small amounts of precipitation. In this case, a sensor would have little or no value, Gordon said.
Are sprinkler rain sensors worth it?
A rain sensor would save you the mental anguish and money from not running your sprinklers during a thunderstorm. You’ll conserve water while still maintaining your lawn if you let a rain sensor manage your sprinklers.
How do you test a hunter rain sensor?
Is there a battery in a hunter rain sensor? There are no batteries to replace. 3. Wireless Operation Up to 800′ (243 m): No wires are required between the rain sensor and controller.
Where do sprinkler rain sensors go? The most important aspect of installing a rain sensor is where to place it. It should be installed in an area that is unobstructed by trees, roof over hangs, or anything else that might block rain from getting to the sensor. If it is a wired sensor, placement is generally near the sprinkler controller.
How do you change a hunter rain sensor?
How do I reset my Hunter Pro C sprinkler system?
How do I test my Hunter Pro C sprinkler system?
To initiate the test program:
- Press and hold the PRG button. The station number will be flashing.
- Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes. …
- After a 2 second pause, the test program will begin.
Why is my Hunter irrigation system not working? The most common reason your sprinklers are not watering is because the rain sensor is active. Do you have a rain sensor on your sprinkler system? If so, slide your sensor bypass switch into the « BYPASS » position (on an SRC, turn the dial into the RUN (Bypass Sensor position).
How much do rain sensors cost?
Most rain sensors can be purchased for less than $100. You need one sensor per controller.
How long do rain sensors last? How long do rain sensors last? The average rain sensor only functions for 3-5 years before needing replacement.
How long does it take for Hunter rain sensor to dry out? The dry out time could be as little as 4 hours depending on the weather conditions (temperature and humidity) and the rain threshold that is set.
How do I fix my Hunter rain sensor?
How do you adjust Hunter rain sensors?
The Mini Clik uses a spindle adjustment to set the amount of rain you want the sensor to witness before it shuts down the system. This amount can be set by adjusting the spindle on top of the sensor and the range is 1/8″ (3.17mm) to 1″ (25.4mm).
